The Loglogic Blower Unit is a self propelled mobile reception and transfer system. It will accept chopped material into the low level dump box and will then, with the full width moving floor, convey the material via a cross auger into the rotary metering valve and convey it pneumatically along a 150 mm hose for a distance of up 1500m
The sophisticated blower management system allows the machine to cope with blockages and jams automatically for continuous unmanned operation.
Features:
  • Hydrostatic drive system with infinitely variable speed control and single joystick control.
  • Fully glazed, rubber mounted, cab with air conditioning, suspension seat, lap restraint and full instrumentation.
  • Escape hatch in roof of cab.
  • 3 lobe rotary compressor with full size inlet and outlet silencers for quiet operation.
  • Automatic engine shut down on overheating or low oil pressure.
Technical Specification:

Engine - VM HR 494 HT 4 cylinder cooled turbo diesel
Engine Power (DIN 70020) ………………………73.5 kW
Displacement …………………………………………2776 L
Fuel tank capacity ………………………………………90 L

Tracks -Bridgestone Rubber Track System
Track Width ………………………………………...600 mm
Track Area……………………………………………. 4 m2
Machine Weight …………………..…. 4.0 tonnes
Ground Pressure ………………………………..…..1.6 psi

Transmission -Transmission Pumps…..… 2 x 21 cc/rev
Maximum Pressure …………………………….... 350 bar
Tractive Effort …………………………………. .4.0 tonnes
Machine speed …………………………………. 0 -14 kph.

Bulk Reception Hopper
Capacity………………………..……………………..11 m3
All rights reserved text and photographs are © 2001 Loglogic Graham Mitchell